ConRad General Use Thermal Blanket Instructions

Step 1

Place the patient on a solid surface warming pad and covered with the ConRad Thermal Blanket during the induction of anesthesia.

Step 2

Keep the patient on the warming pad and covered with the ConRad Thermal Blanket as much as possible while prepping and applying patient monitors.

Step 3

Keep the patient covered with the ConRad Thermal Blanket when moving the patient to the procedure table.

Step 4

Make certain that an insulating layer, such as a regular blanket or another ConRad Thermal Blanket, is underneath and between the patient and the underlying surface. Place the ConRad Thermal Blanket so that the side labeled PATIENT SIDE is next to the patient.

Step 5

Once positioned, make certain that the ConRad Thermal Blanket drapes around the patient as close as possible.

Step 6

The ConRad Thermal Blanket may be cleaned with soap and water or a germicidal solution.

Step 7

The ConRad Thermal Blankets may be used with other patient warming systems such as forced air, electrical and water warming systems.